Danh mục sản phẩm


Danh mục sản phẩm > > Tecsis Sensor > EGS08


Mã sản phẩm: EGS08
Nhà Sản Xuất:

Tecsis Sensor

Tài liệu hướng dẫn Download


The limit switch EGS08 allows to control 3 limit values via 3 relays. Load cells with an outputsignal range of 4...20mA can be connected to it. The housing is prepared for top hat rail mounting.


  • Analog limit switch for top hat rail mounting
  • For sensors with 4...20mA output 2-/3-wire
  • Tecsis force transducers with SIL3-relay connectable
  • 3 potential free relay contacts (closing contacts) with status LED
  • Accuracy 0,3% of the full scale
  • Potentiometer allows easy adjusting of the limit values
  • Cable break and loose rope recognition
  • Sensor supply 21 VDC, max. 50 mA
  • Needed supply energy 24 VAC or VDC
  • User-friendly and easy to maintain because of big screw type terminals
  • Compact design
  • Filter settings selectable through solder bridges
  • Protection class IP 40

In combination with load cells or force transducers the limit switch EGS08 is utilized in weighing and load control in hoisting devices, cranes and more. Connectable are force transducer or load cells with an output signal of 4...20 mA in 2- or 3-wire design. By changing a solder bridge an input range of 1...9 mA can be choosen. The internal sensor supply is 21 VDC with max 50 mA. Usually the switch is not pre-adjusted and the customer connects it to the force transducer and also adjusts it. The adjustment of the level of the 3 limit values, which correlates to a certain load of the connected strain gauges, is done by a potentiometer.  When turned off or not supplied with power the three relay contacts drop off. If one of the sensors is broken or not connected all relays switch to the state of overload. A status LED for each relay illuminates as long as the contact is closed.  The limit switch is designed for top hat rail mounting in a switch cabinet.  The robust full housing also allows stand-alone mounting.

» Tecsis Sensor - P1440/P1442/P1444/P1446/P1495: 0 VND (P1440/P1442/P1444/P1446/P1495)
» Tecsis Sensor - EGS80: 0 VND (EGS80)
» Tecsis Sensor - E3906: 0 VND (E3906)
» Tecsis Sensor - E3907: 0 VND (E3907)
» Tecsis Sensor - EPE01: 0 VND (EPE01)
» Tecsis Sensor - E3908: 0 VND (E3908)
» Tecsis Sensor - ELMS1: 0 VND (ELMS1)
Liên Hệ Trực Tuyến

Tel: (08) - 3511.5746

Fax: (08) - 3511.7931

Hot Line: 0978.996.122


belimo dwyer fireye spirax-sarco


Cảm Biến - Sensor

Lượt truy cập

29-31 Dinh Bo Linh Street, Ward 24, Binh Thanh District.
Telephone: 08-3511.5746      Fax: 08-3511.7931
Email: kd2@cntruongthanh.com
Hotline: 0978.996.122
Copyright © 2010 cntruongthanh.com
Phát triển bởi N N H