Danh mục sản phẩm


Danh mục sản phẩm > > Tecsis Sensor > EGS01


Mã sản phẩm: EGS01
Nhà Sản Xuất:

Tecsis Sensor

Tài liệu hướng dẫn Download


The limit switch EGS01 allows to control 3 limit values via 3 relays. Up to 4 strain gauges or load cells with mV/V can be connected (parallel) to it. The housing is prepared for top hat rail mounting.


  • Analog limit switch for top hat rail mounting
  • Strain gauges up to 3,1 mV/V evaluable
  • 3 potential free relay contacts (closing contacts) with status LED
  • Accuracy 0,3 % of full scale
  • Potentiometer allows easy and continous adjustment of the limit values
  • Up to 4 strain-gauges with 350 ohm parallel connectable
  • Bridge supply 5 VDC
  • Needed supply energy 24 VDC
  • User-friendly and easy to maintain because of big screw type terminals
  • Compact design
  • Filter can be adjusted by microswitches
  • Protection class IP 20, optional with extra casing IP 67

In combination with load cells or force transducers the limit switch EGS01 can be applied to control forces or loads. Strain gauges with an output signal of up to 3,1 mV/V can be connected to the switch. Micro switches allow to choose between 0...1,9 mV/V and 0...3,1 mV/V as input signal range. The internal sensor supply is 5 VDC. Usually the switch is not pre-adjusted and the customer connects it to the force transducer and also adjusts it. The adjustment of the level of the 3 limit values, which correlates a certain load of the connected strain gauges, is done by potentiometer. When turned off, for example when the power supply is disconnected, the 3 relay switches are open. When running and lower than the adjusted threshold the output relays are in working state and the relay contacts are closed. A status LED for each relay illuminates as long as the contact is closed. The limit switch is designed to be integrated in switch cabinets and the housing allows to mount it on top hat rails. The limit switch is also available in a full housing with clear cover and protection class IP67.

» Tecsis Sensor - P1440/P1442/P1444/P1446/P1495: 0 VND (P1440/P1442/P1444/P1446/P1495)
» Tecsis Sensor - EGS08: 0 VND (EGS08)
» Tecsis Sensor - EGS80: 0 VND (EGS80)
» Tecsis Sensor - E3906: 0 VND (E3906)
» Tecsis Sensor - E3907: 0 VND (E3907)
» Tecsis Sensor - EPE01: 0 VND (EPE01)
» Tecsis Sensor - E3908: 0 VND (E3908)
Liên Hệ Trực Tuyến

Tel: (08) - 3511.5746

Fax: (08) - 3511.7931

Hot Line: 0978.996.122


belimo dwyer fireye spirax-sarco


Cảm Biến - Sensor

Lượt truy cập

29-31 Dinh Bo Linh Street, Ward 24, Binh Thanh District.
Telephone: 08-3511.5746      Fax: 08-3511.7931
Email: kd2@cntruongthanh.com
Hotline: 0978.996.122
Copyright © 2010 cntruongthanh.com
Phát triển bởi N N H