Danh mục sản phẩm


Danh mục sản phẩm > > Tecsis Sensor > E1932


Mã sản phẩm: E1932
Nhà Sản Xuất:

Tecsis Sensor

Tài liệu hướng dẫn Download


Digital displays are used to present sensor signals. The illuminated 6-digit LED-display of the model E1932X series shows values measured by sensors with mV/V signal. The high precision weighing electronics of the model E1932X series are priced reasonable. The device is designed for panel-mounting. Optional is a wide range of interface-extensions to link controls available.


  • Weighing indicator with LCD-display for panel mounting
  • 6-digit LCD-display, Digits 20 mm high, illuminated
  • For input signals up to ±3mV/V (4- and 6-wire)
  • Up to 4 DMS-sensors with 350 ohm parallel connectable
  • Bridge supply 5 VDC
  • Optional for 4...20mA or 0...10V (passiv) input signal
  • Accuracy 0,02% of the full scale
  • Displays units g, kg, lb or t
  • Freely programmable via keys
  • Function keys: Zero, Tare, Gross/Net, Print
  • 2 programmable limit contacts (from model E1932X200)
  • 1 input for remotecontroll (from model E1932X200)
  • Optional analog output 4...20mA instead of serial RS-232 interface (from modelE1932X200)
  • Limit frequency up to 20 Hz for nearly static applications
  • Runs with AC,DC and (rechargeable) batteries (4,8...24 VDC)
  • E1932X100 and ...200 with ABS-Housing
  • E1932X300 in housing made of stainless steel
  • All devices also available with table housing

The digital weighing indicator E1932 suits stationary as well as mobile applications. It is being used for weighing devices of forklifts, cabines and cranes as well as in platform scales and OEM-applications. The robust housing and the many possibilities to supply the device with power are another benefit of the series. The illuminated digital 6-digt display allows to read measured values and status easily. All strain gauges with an output signal with up to ±3mV/V can be connected to the device (max. 4 sensors 350 ohm parallel). The internal sensor supply is 5 VDC. We also offer an additional module which allows to compute and to display 4...20mA or 0...10V signals. In this case the sensor supply needs to be external. Usually the customer connects the display it to the force transducer and also adjusts it.  This is done with the help of the keyboard or with a free software and the integrated optical interface, which is located on the front of the housing. All settings can be saved and transfered to an other device. Starting at device version E1932X200 there are 2 limit contacts, a RS-232 interface and an additional programmable function key integrated. The many options to adjust filters allow to zero interfering signals. There is also a version with very low height available (Model E1932X300). This model is also available with a housing with protection class IP65 made of stainless steel which can be mounted on walls or tables.

When run by battery power it is possible to turn on an energy saving mode and to turn off the background illumination. Charging and low power of the battery power are also indicated.

» Tecsis Sensor - P1440/P1442/P1444/P1446/P1495: 0 VND (P1440/P1442/P1444/P1446/P1495)
» Tecsis Sensor - E1999: 0 VND (E1999)
» Tecsis Sensor - EZE55: 0 VND (EZE55)
» Tecsis Sensor - EGS01: 0 VND (EGS01)
» Tecsis Sensor - EGS08: 0 VND (EGS08)
» Tecsis Sensor - EGS80: 0 VND (EGS80)
» Tecsis Sensor - E3906: 0 VND (E3906)
Liên Hệ Trực Tuyến

Tel: (08) - 3511.5746

Fax: (08) - 3511.7931

Hot Line: 0978.996.122


belimo dwyer fireye spirax-sarco


Cảm Biến - Sensor

Lượt truy cập

29-31 Dinh Bo Linh Street, Ward 24, Binh Thanh District.
Telephone: 08-3511.5746      Fax: 08-3511.7931
Email: kd2@cntruongthanh.com
Hotline: 0978.996.122
Copyright © 2010 cntruongthanh.com
Phát triển bởi N N H