Danh mục sản phẩm


Danh mục sản phẩm > > Tecsis Sensor > E1931


Mã sản phẩm: E1931
Nhà Sản Xuất:

Tecsis Sensor

Tài liệu hướng dẫn Download


Digital displays are used to present sensor signals. The model E1931 series allows to display values measured by sensors with 0/4...20mA or 0...10V signal directly on a 5-digit LED-display. It is designed for panel-mounting. Optional there is a wide range of interface-extensions to link controls available. The model E1931 series can be equipped with 2 or 4 relay-outputs, an analog output and a serial interface.


  • Digital Display with LED-display for panel-mounting
  • LED, 5-digit, 14 mm high, red
  • For 0/4...20mA, 2- or 3-wire and 0...10VInput-signals
  • Freely programmable via keys
  • 2 or 4 freely programmable limit contacs
  • Freely programmable analog output (0/4-20mA / 0...10 V)
  • Digital output signal via serial RS-232 or RS-485 interface
  • 3 logical inputs for remote operating
  • Limit frequency up to 5 Hz for nearly static applications
  • Accuracy 0,03% of the full scale
  • Sensor supply 24 VDC @ 100 mA
  • Needed power supply 85...250 VAC, optional 11-36 VDC
  • User friendly and easy to maintain because of big screw-type terminals, keys and LED-display
  • Protection Class IP 65 front when built-in
  • Optional available with complete robust housing made of aluminum

The high accuracy of the digital display E1930 makes it suit weighing as well as statical force measuring or to monitoring loads on machines. Measurement values and the status of the relay-outputs are presented on the digital 5-digit display. All strain gauges with an output signal of 0/4...20mA 2- or 3-wire as well as 0...10V can be connected. The internal sensor supply can is 24 VDC max 100mA. Usually the customer connects the display it to the force transducer and also adjusts it. The programming is done menu-guided via the keys. It is possible to assign functions like tara, print and so on to the 3 programmable keys. The serial interface allows to retrieve and to set values and parameters. The optional 2 or 4 relays allow to monitor overtraveling and underrunning of limit values. The optional freely programmable analog output offers a 0/4...20mA output signal for analog interpretation. Filters allow to zero interfering signals.

» Tecsis Sensor - P1440/P1442/P1444/P1446/P1495: 0 VND (P1440/P1442/P1444/P1446/P1495)
» Tecsis Sensor - E1931X402: 0 VND (E1931X402)
» Tecsis Sensor - E1930X800: 0 VND (E1930X800)
» Tecsis Sensor - E1932: 0 VND (E1932)
» Tecsis Sensor - E1999: 0 VND (E1999)
» Tecsis Sensor - EZE55: 0 VND (EZE55)
» Tecsis Sensor - EGS01: 0 VND (EGS01)
Liên Hệ Trực Tuyến

Tel: (08) - 3511.5746

Fax: (08) - 3511.7931

Hot Line: 0978.996.122


belimo dwyer fireye spirax-sarco


Cảm Biến - Sensor

Lượt truy cập

29-31 Dinh Bo Linh Street, Ward 24, Binh Thanh District.
Telephone: 08-3511.5746      Fax: 08-3511.7931
Email: kd2@cntruongthanh.com
Hotline: 0978.996.122
Copyright © 2010 cntruongthanh.com
Phát triển bởi N N H