Danh mục sản phẩm

NHÀ CUNG CẤP

Danh mục sản phẩm > > Tecsis Sensor > E1930X800

E1930X800

Mã sản phẩm: E1930X800
Nhà Sản Xuất:

Tecsis Sensor

Tài liệu hướng dẫn Download

Description

Large digit displays allow to read measured values even from distance. It is possible to read the 100 mm high 5 digit display of the model E1930X800 series, which show values measured by sensores with mV/V signal, from a distance of 50 meters.


 The display is designed for panel-mounting. Optional there is a wide range of interface-extensions to link controls available. The model E1931 series can be equiped with 2 or 4 relay-outputs, an analog output and a serial interface.

Features

  • Large LED-Display for strain gauges designed for panel mounting
  • 5-digit, digits 100 mm high, red, readable from 50 meters distance
  • For  input signals ±24mV or ±240mV
  • Freely programmable through keyremotecontroll
  • 2 or 4 freely programmable limit contacs
  • Freely programmable analog output (0/4-20mA / 0...10 V)
  • Digital output signal via serial RS-232 or RS-485 interface
  • 3 logical inputs for remote operating
  • Limit frequency up to 5 Hz for nearly static applications
  • Accuracy 0,03% of the full scale
  • Up to 4 strain gauges with 350 ohm parallel connectable
  • Bridge supply 5 or 10 VDC
  • Needed power supply 85...250 VAC
  • User friendly and easy to maintain because of big screw-type terminals, keys and LED-display
  • Protection class IP 65 front when mounted
  • Optional available with complete robust housing made of aluminum protection class IP 65

Application
The high accuracy of the large digital display E1930X800 makes it suit for weighing as well as for static force measurement and monitoring of forces on machines. The 5, 100mm high, digital digits make the LED-Display readable even from a distance of 50 meters. Because of this the display can be found for example at cranes, hoisting gear and silos. All strain gauges (max 4 sensors with 350 ohm parallel) with an output signal up to max ±4,8mV/V respectively ±48mV/V can be connected. The internal sensor supply can be 5 or 10 VDC. Usually the customer connects the display it to the force transducer and also adjusts it. The programming is done menu-guided via the keys, those offer the same functions as the smaller E1930models. Optional there is a key remotecontroll available, which is connectable to the display via a RJ45-plug. The 3 logical inputs can be used to trigger functions like tare or print. The serial interface allows to retrieve and to set values and parameters. The optional 2 or 4 relays allow to monitor overtraveling and underrunning of limit values. The optional freely programmable analog output offers a 0/4...20mA output signal for analog interpretation. Filters allow to zero interfering signals.


» Tecsis Sensor - P1440/P1442/P1444/P1446/P1495: 0 VND (P1440/P1442/P1444/P1446/P1495)
» Tecsis Sensor - E1932: 0 VND (E1932)
» Tecsis Sensor - E1999: 0 VND (E1999)
» Tecsis Sensor - EZE55: 0 VND (EZE55)
» Tecsis Sensor - EGS01: 0 VND (EGS01)
» Tecsis Sensor - EGS08: 0 VND (EGS08)
» Tecsis Sensor - EGS80: 0 VND (EGS80)
Liên Hệ Trực Tuyến

Tel: (08) - 3511.5746

Fax: (08) - 3511.7931

Hot Line: 0978.996.122

kd2@cntruongthanh.com



SẢN PHẨM CHÍNH
belimo dwyer fireye spirax-sarco


watlow
tecsis-sensor

Cảm Biến - Sensor

Lượt truy cập



TRUONG THANH INDUSTRIAL CO., LTD.
29-31 Dinh Bo Linh Street, Ward 24, Binh Thanh District.
Telephone: 08-3511.5746      Fax: 08-3511.7931
Email: kd2@cntruongthanh.com
Hotline: 0978.996.122
Copyright © 2010 cntruongthanh.com
Phát triển bởi N N H
www.cntruongthanh.com