Danh mục sản phẩm

NHÀ CUNG CẤP

Danh mục sản phẩm >

Spirax Sarco


New Product
LC1350 Level Controller

LC1350 Level Controller


Mã sản phẩm: LC1350 Level Controller
Nhà sản xuất: Spirax Sarco
Description
The Spirax Sarco LC1350 has two alarm channels that can be independently configured high or low to control the water level of a boiler, tank or vessel by operating a pump, valve or solenoid. It has been designed as an on/off level controller for use with the LP10-4 four-tip
conductivity probe operating on supply voltages from 110 to 240 Vac.
The controller is suitable for use with virtually all qualities of conductive liquids from salt solutions or boiler water to condensate having an electrical conductivity as low as 1 μS /cm at 25°C.

Pressure Transmitter Model PT

Pressure Transmitter Model PT


Mã sản phẩm: Pressure Transmitter Model PT
Nhà sản xuất: Spirax Sarco
Description
The Model PT combines micro-machined silicon diaphragms with fully welded stainless steel and hastelloy pressure ports to provide a highly accurate, stable pressure transmitter. It is constructed with the materials and environmental protection required for industrial applications.
The silicon sensors incorporate developments derived from aerospace applications.
These developments are used to decrease output noise, non-linearity, and hysteresis and to improve long term stability.

UTM10 Non-intrusive ultrasonic liquid flowmeter

UTM10 Non-intrusive ultrasonic liquid flowmeter


Mã sản phẩm: UTM10 Non-intrusive ultrasonic liquid flowmeter
Nhà sản xuất: Spirax Sarco
The UTM10 - the new ultrasonic clamp-on fl ow and energy meter for chilled and hot water applications from Spirax Sarco.
Easy to install and maintain, it provides accurate and repeatable measurement readings on clean fluids and liquids with small amounts of solids or aeration, without line shutdown or pipe penetration.

MTI10 Insertion and MTL10 InlineThermal Mass Flowmeter and Temperature Transmitter

MTI10 Insertion and MTL10 InlineThermal Mass Flowmeter and Temperature Transmitter


Mã sản phẩm: MTI10 Insertion and MTL10 InlineThermal Mass Flowmeter and Temperature Transmitter
Nhà sản xuất: Spirax Sarco
Description
The MTI10 insertion thermal mass flowmeter and the MTL10 inline thermal mass flowmeter provide accurate mass flow measurement of clean, dry gases using constant temperature differential sensing for fast response and low flow accuracy. Constant temperature differential is achieved by changing the power to the sensor. The amount of power applied to the sensor is proportional to the mass flow rate of the gas being measured. The MTI10/MTL10 is virtually immune to changes in temperature and pressure over a wide range of flow.

Insertion turbine flow-meter

Insertion turbine flow-meter


Mã sản phẩm: Insertion turbine flow-meter
Nhà sản xuất: Spirax Sarco

The RIM10 rotor insertion flow meter for steam, gases and liquids can be fitted directly into operational pipework using standard hot-tapping techniques, eliminating the need to disrupt production for installation:

  • Typical savings compared to full-bore flowmeters:
    - 80% for the 600 mm (24") pipelines and - 50% for 250 mm (10") pipelines.
  • Suitable for installation and servicing under full flow conditions.
  • Delivers accurate measurements for excellent energy management.
  • Outstanding for low flowrate and wide turndown applications.
  • Process pressure up to 137.8 bar g (2 000 psi g) and Process temperatures up to 400°C (750°F)

BSP Pressure Gauge with Syphon and Cock

BSP Pressure Gauge with Syphon and Cock


Mã sản phẩm: BSP Pressure Gauge with Syphon and Cock
Nhà sản xuất: Spirax Sarco
Description
Pressure gauge with 100 mm diameter dial with units marked in bar,  psi  and  inches  hg  for  vacuum  as  appropriate  and  having  a BSP connection. The gauge is supplied with either:
Ring type syphon tube and cock or a 'U' type syphon tube and cock.
Bourdon tube gauge, constructed in accordance with DIN 16005.

Blowdown controller for boiler BC series

Blowdown controller for boiler BC series


Mã sản phẩm: Blowdown controller for boiler BC series
Nhà sản xuất: Spirax Sarco
Description:
The BC3150 is a blowdown controller for steam boilers. It controls TDS (total dissolved solids – salts in solution) by opening and closing a blowdown valve. It works in conjunction with a Spirax Sarco conductivity sensor, a boiler blowdown valve or condensate dump valve.
The product can be panel, DIN rail or chassis mounted and powered by a 110 to 240 Vac at 50 / 60 Hz mains supply.
The front panel has a 3 digit LCD and a five-button keypad.
The product has no battery. The programmed settings are held in non-volatile memory (Flash) and are written to after changing a parameter and pressing the OK key.

Pressure control valve

Pressure control valve


Mã sản phẩm: Pressure control valve
Nhà sản xuất: Spirax Sarco
Well designed steam systems produce clean dry steam for delivery at high pressure - the best quality steam at the lowest cost.
Lower pressure steam is usually needed at the point of use. Effective control demands an automatic valve that can reduce steam pressure accurately, reliably and at a cost to suit the application.

Temperature control valve SA121

Temperature control valve SA121


Mã sản phẩm: Temperature control valve SA121
Nhà sản xuất: Spirax Sarco

Self-acting controls, the simplest and most reliable solution for controlling temperature.

  • Accurate
  • Reliable
  • Easy to use
  • Easy to install
  • Easy to commission

Next»
Liên Hệ Trực Tuyến

Tel: (08) - 3511.5746

Fax: (08) - 3511.7931

Hot Line: 0978.996.122

kd2@cntruongthanh.com



SẢN PHẨM CHÍNH
belimo dwyer fireye spirax-sarco


watlow
tecsis-sensor

Cảm Biến - Sensor

Lượt truy cập



TRUONG THANH INDUSTRIAL CO., LTD.
29-31 Dinh Bo Linh Street, Ward 24, Binh Thanh District.
Telephone: 08-3511.5746      Fax: 08-3511.7931
Email: kd2@cntruongthanh.com
Hotline: 0978.996.122
Copyright © 2010 cntruongthanh.com
Phát triển bởi N N H
www.cntruongthanh.com