Danh mục sản phẩm

NHÀ CUNG CẤP

Danh mục sản phẩm > > GF > GF Signet 8860 Conductivity Controller

GF Signet 8860 Conductivity Controller

Mã sản phẩm: GF Signet 8860
Nhà Sản Xuất:

GF

Tài liệu hướng dẫn Download

Features

  • Dual sensor input
  • Display and/or control: μS, mS, PPM or PPB (TDS), kΩ, MΩ, % rejection, difference, ratio, °C or °F
  • Three fully scaleable 4 to 20mA outputs
  • Two open collector outputs; Four programmable relays
  • Time delay relay function
  • Proportional pulse control capability
  • Compatible with ALL Signet conductivity electrodes
  • Programmable temperature compensation
  • NEMA 4X/IP65

The GF Signet 8860 Two-Channel Conductivity Controller is packed with a set of features and capabilities ideal for the real needs of water treatment applications. The GF Signet 8860 Two-Channel Conductivity Controller accommodates two separate and independent input sources and can be powered with AC or 24VDC. Programmable via a simple and intuitive menu system, the GF Signet 8860 Two-Channel Conductivity Controller can also be programmed to measure a raw conductivity value by turning off the temperature compensation mode, hence meeting USP requirements.

To control the process, the GF Signet 8860 Two-Channel Conductivity Controller is equipped with four dry contact relays and three 4 to 20mA output loops. Calculated measurements include: Difference, Ratio or % Rejection. Two of the relays may be converted into open collector outputs with the flip of a switch. Operating modes for the relays and open collector outputs are high or low alarm, pulse, or special USP alarm mode. The GF Signet 8860 Two-Channel Conductivity Controller is offered with a NEMA 4X/IP65 front panel with a self-healing window in a 1/4 DIN package for easy panel installation.

Applications for the GF Signet 8860 Two-Channel Conductivity Controller
  • RO/DI System Control
  • Demineralizer Regeneration and Rinse
  • Scrubber, Cooling Tower & Boiler Protection
  • Chemical Concentration
  • Rinse Tank Water Quality
  • Desalination
  • Leak Detection
  • Aquatic Animal Life Support Systems
  • Aquaculture
  • Environmental Studies
System Compatibility

The GF Signet GF Signet 8860 Two-Channel Conductivity Controller is compatible with a wide variety of GF Signet components. Please click here to view typical system configurations. If you have any questions about your particular installation, please contact us.


» GF - Georg Fischer Type 133 Ball Valve: 0 VND (Georg Fischer Type 133 )
» GF - GF Signet 4150 Turbidimeter: 0 VND (GF Signet 4150 )
» GF - GF Signet 5090 Flow Monitor: 0 VND (GF Signet 5090 )
» GF - GF Signet U1000 UltraFlow Ultrasonic Flow Sensor: 0 VND (GF Signet U1000 UltraFlow Ultrasonic Flow Sensor)
» GF - GF Signet 9900-1BC Batch Controller: 0 VND (GF Signet 9900-1BC Batch Controller)
» GF - GF Signet 2774-2777 pH and ORP Electrodes: 0 VND (GF Signet 2774-2777 )
» GF - GF Signet 4630 Chlorine Analyzer System: 0 VND (GF Signet 4630 Chlorine Analyzer System)
Liên Hệ Trực Tuyến

Tel: (08) - 3511.5746

Fax: (08) - 3511.7931

Hot Line: 0978.996.122

kd2@cntruongthanh.com



SẢN PHẨM CHÍNH
belimo dwyer fireye spirax-sarco


watlow
tecsis-sensor

Cảm Biến - Sensor

Lượt truy cập



TRUONG THANH INDUSTRIAL CO., LTD.
29-31 Dinh Bo Linh Street, Ward 24, Binh Thanh District.
Telephone: 08-3511.5746      Fax: 08-3511.7931
Email: kd2@cntruongthanh.com
Hotline: 0978.996.122
Copyright © 2010 cntruongthanh.com
Phát triển bởi N N H
www.cntruongthanh.com