Danh mục sản phẩm

NHÀ CUNG CẤP

Danh mục sản phẩm > > BD Sensors > MiCOM Alstom P746

MiCOM Alstom P746

Mã sản phẩm: MiCOM Alstom P746
Nhà Sản Xuất:

Alstom Grid

MiCOM Alstom P746 centralised numerical busbar protection provides complete protection for all voltage levels up to extra-high voltage busbar configurations.

Proven techniques and dynamic topology processing algorithms offer a combination of security, speed and sensitivity.
Simple configuration for centralised architectures
The MiCOM Alstom P746 differential busbar protection provides a centralised one box or three box architecture and is very simple to use, as it does not need to be deeply engineered and supports easy operation and maintenance of busbars.

Basic description:

Complete protection for MV and HV busbar configurations with up to 2 zones and 18 feeders
Suitable for scheme engineering by any integrator - no pre-engineering, no engineering hours payable to Alstom

Key customer benefits:

Use one box for schemes up to 6 feeders, and 3 boxes (one per phase) for larger schemes up to 18 feeders
Interoperable with all classes of CT: IEEE, IEC, air-gapped, non-gapped - and CTs with moderate knee point voltage
10 integrated function keys, tri-colour LEDs, and graphical programmable logic permit the creation of comprehensive schemes, tailored to your needs
IEC 61850 redundant Ethernet, supporting self healing ring, RSTP, dual homing or PRP

Main characteristics:

Typical operating time of 12 ms with high speed/high break (HSHB) contacts or 17 ms with standard contacts
Phase segregated biased current differential high speed busbar protection
Easy maintenance, operation and future expansion of the busbar supported
Deploy in ring-bus/mesh corners, single busbars, sectionalised busbars, and one per bus in breaker and a half topologies

Overall differentiation factors:

Tripping time is independent of substation topology and number of feeders
User-friendly software tools for scheme monitoring
Inbuilt CT saturation proof breaker failure protection
Harsh environment protection extends the life of the product
P746 remote HMI PC application software:
MiCOM Alstom P746 remote PC HMI provides the following features:
‘Scheme editor’ – the scheme editor allows the user to define and create a P746 Busbar scheme using Busbar, CT, circuit breaker and isolator graphical icons.
‘Dynamic synoptic’- the dynamic synoptic allows the user to display the P746 measured analogue quantities and DDB (digital data bus) status information via the user defined P746 scheme created using the ‘scheme editor’.

Please use our contact form to request the software

Available in English, French, German, Spanish, Chinese and Russian

About MiCOM P40 Agile

Alstom’s philosophy is one of continuous improvement in our products and solutions.  Our emphasis on communication in MiCOM has become a focus which secures leadership in the digital substation.  To mark this phase of evolution, the brand “P40 Agile” is applied to the range.  P40 Agile is a mark of performance and quality, proudly available from Alstom, and only from Alstom.


» BD Sensors - MiCOM Alstom P846: 0 VND (MiCOM Alstom P846)
» BD Sensors - MiCOM Alstom P847: 0 VND (MiCOM Alstom P847)
» BD Sensors - MCAG Protection relay: 0 VND (MCAG)
» BD Sensors - MFAC Protection relay: 0 VND (MFAC)
» BD Sensors - MVTP Monitoring device: 0 VND (MVTP)
» BD Sensors - MiCOM Alstom P841: 0 VND (MiCOM Alstom P841)
» BD Sensors - MiCOM Alstom P842: 0 VND (MiCOM Alstom P842)
Liên Hệ Trực Tuyến

Tel: (08) - 3511.5746

Fax: (08) - 3511.7931

Hot Line: 0978.996.122

kd2@cntruongthanh.com



SẢN PHẨM CHÍNH
belimo dwyer fireye spirax-sarco


watlow
tecsis-sensor

Cảm Biến - Sensor

Lượt truy cập



TRUONG THANH INDUSTRIAL CO., LTD.
29-31 Dinh Bo Linh Street, Ward 24, Binh Thanh District.
Telephone: 08-3511.5746      Fax: 08-3511.7931
Email: kd2@cntruongthanh.com
Hotline: 0978.996.122
Copyright © 2010 cntruongthanh.com
Phát triển bởi N N H
www.cntruongthanh.com